Bi-annual HVAC tune-ups that keep your system running and your costs predictable
One plan covers your heating, cooling, or both, with two seasonal tune-ups a year, priority scheduling, and 10% off parts and labor. Catch small problems before they become expensive repairs.
Cost savings: an efficient system uses less energy, so regular care helps keep monthly bills in check
Extended equipment life: routine care prevents the early, costly replacements that neglected systems face
Safety: we inspect for the cracks, leaks, and faults that put your equipment and your family at risk
Warranty assurance: documented maintenance supports manufacturer warranty claims
What happens during a tune-up
Every tune-up follows the same 20-point checklist, whether it's a one-time visit or part of your annual plan.
Step 1
System diagnostics
Our technicians run a full diagnostic on your heating or cooling system, testing operation, measuring efficiency, and identifying any issues before they become costly repairs.
- What happens: full system diagnostic
- What you do: share any comfort concerns
- What you get: baseline performance data
- Operation testWe cycle your system through heating and cooling modes to verify proper startup, operation, and shutdown.
- Efficiency analysisTemperature differentials and cycle times are measured to assess how efficiently your system converts energy to comfort.
Step 2
Inspection
Every component gets a hands-on inspection — coils, electrical connections, refrigerant lines, heat exchanger, safety controls, and belts. We catch wear before it causes a breakdown.
- What happens: component-by-component review
- What you do: mention any unusual noises or smells
- What you get: a detailed condition report
- Coil and electrical inspectionEvaporator and condenser coils are checked for damage and buildup. All electrical connections are tested for tightness and safety.
- Safety controls and heat exchangerHeat exchanger is inspected for cracks, and all safety controls are tested to confirm proper operation.
Step 3
Cleaning and filter service
We clean the condensate drain, drain pan, and drain line to prevent water damage and mold. The ignition and burner assembly is cleaned for safe, efficient combustion. Your filter is replaced.
- What happens: thorough cleaning and filter swap
- What you do: nothing — we handle it all
- What you get: cleaner air and better airflow
- Condensate drain serviceDrain pan, drain line, and condensate trap are flushed to prevent clogs, leaks, and mold growth.
- Burner and ignition cleaningIgnition assembly and burner components are cleaned to ensure safe, complete combustion.
- Filter replacementOld filter is removed and replaced with a clean one, restoring proper airflow and indoor air quality.
- Drain pan inspectionWe check for cracks, corrosion, or standing water that could lead to leaks or water damage.
Step 4
Calibration and balancing
Your thermostat is calibrated against actual air temperature, airflow is measured and balanced across zones, and all moving parts are lubricated to reduce friction and noise.
- What happens: precision tuning
- What you do: mention any hot or cold spots
- What you get: even comfort room to room
- Thermostat calibrationWe verify your thermostat reads accurately and adjust it so the system cycles at the right temperatures.
- Airflow measurement and balancingSupply and return airflow is measured at each register, and dampers are adjusted to even out temperature differences between rooms.
Step 5
Final check and report
We inspect ductwork and ventilation for leaks or damage, run a final vibration and noise check, and walk you through everything we found — what was fixed, what to watch, and when to schedule your next visit.
- What happens: ductwork and final system test
- What you do: review findings with your technician
- What you get: a written maintenance report
- Ductwork inspectionAccessible ductwork is checked for leaks, loose connections, and damaged insulation that waste energy.
- Ventilation checkSupply and return vents are inspected to make sure air circulates freely throughout your home.
- Vibration and noise checkUnusual vibrations or sounds are investigated to catch bearing wear, loose panels, or fan issues early.
- Written maintenance reportYou receive a summary of all findings, completed work, and recommendations for keeping your system in top shape.
Your HVAC system needs regular attention to perform at its best
Just as you would not drive for thousands of miles without an oil change, your heating and cooling system needs regular attention to stay efficient, reliable, and safe. A plan brings our specialists out twice a year, once before cooling season and once before heating season, so a worn part gets caught in spring or fall instead of failing on the hottest or coldest day. It is the difference between a planned visit and an emergency call.
HVAC tune-ups and maintenance plans
One-time tune-ups or annual plans that keep your heating and cooling running efficiently — with priority scheduling, parts and labor discounts, and no overtime charges.
One-time tune-up
A single seasonal service visit
- System diagnostic testing
- Coil inspection & cleaning
- Electrical inspection
- Refrigerant level inspection
- Condensate drain cleaning
- Filter replacement
- Thermostat calibration
- Airflow measurement & balancing
- All additional system-specific maintenance
1-unit maintenance plan
Twice-yearly service for 1 heating OR 1 cooling unit
- Seasonal tune-up service, twice per year
- All tune-up services included
- 10% off parts & labor
- 10% off each additional unit
- No overtime charges
- Priority scheduling
- Emergency calls
- Priority line, 7 am to 6 pm
2-unit maintenance plan
Twice-yearly service for 1 heating AND 1 cooling unit
- Seasonal tune-up service, twice per year
- All tune-up services included
- 10% off parts & labor
- 10% off each additional unit
- No overtime charges
- Priority scheduling
- Emergency calls
- Priority line, 7 am to 6 pm
Plan pricing covers one unit unless noted. Each additional unit is discounted 10%. Plans include priority scheduling, no overtime charges, and discounted parts and labor. Ask about exact pricing for your system during a free estimate.
Plan coverage
Coverage that adapts to the equipment in your home
WHAT WE COVER
Every system gets the care its design calls for
Each tune-up is equipment-specific. On cooling systems we inspect and clean coils, verify refrigerant, clear the condensate drain, and balance airflow. On heating systems we add a heat exchanger inspection for carbon monoxide safety, clean the ignition and burner assembly, and check belts and pulleys. Ductwork, ventilation, and safety controls are reviewed on every visit, and each tune-up ends with a full system operation test.
- Cooling: coil cleaning, refrigerant check, condensate drain, airflow balance
- Heating: heat exchanger inspection, burner cleaning, belt and pulley check
- Every visit: ductwork review, safety controls, operation test and efficiency analysis
PLAN BENEFITS
Membership that pays for itself across the whole year
A plan changes how the rest of the year works, not just the two visits. Members move to the front of the line when peak season hits, with a dedicated line staffed 7am to 6pm and emergency call access at no overtime charge. Repairs and expansions cost less too, with a 10% discount on parts, labor, and each additional unit enrolled.
- Priority scheduling during peak heating and cooling season
- 10% discount on parts, labor, and additional units enrolled
- Documented maintenance visits that support manufacturer warranty claims
We work with brands you trust
As authorized dealers and installers, we carry top-rated HVAC and home comfort equipment from leading manufacturers.
Pick the tune-up coverage that fits your home
A single seasonal tune-up, regularly $150, with the full multi-point inspection. We diagnose, clean, and calibrate one heating or cooling unit so it runs efficiently. Best if you only need service once and want to try us first.
Two seasonal tune-ups a year for one heating OR one cooling unit, saving $50 a year versus one-time visits. Adds priority scheduling, emergency call access, no overtime charges, and 10% off parts and labor.
Twice-yearly seasonal service for one heating AND one cooling unit, saving $125 a year versus one-time visits. All plan benefits included, plus 10% off each additional unit you add to the plan.
What HVAC customers across Connecticut say
HVAC services
From ductwork to air quality, we handle every aspect of home comfort.
Heating
Installation, repair, and replacement for every heating system
Air Conditioning
Cooling installation, repair, and maintenance
Ductwork
Duct sealing, repair, and replacement
Indoor Air Quality
Filtration, ventilation, and humidity control
HVAC Maintenance
Bi-annual tune-ups with priority scheduling
Home Energy Solutions audit
Includes about $1,000 in services and unlocks rebates across your home.
Water Heaters
Heat pump water heaters and high-efficiency tank replacements.
Air Sealing
Seal gaps and cracks that let conditioned air escape and outdoor air in.
Ready to protect your HVAC investment?
With a Maintenance Plan you can rest easy -- bi-annual tune-ups, priority scheduling, and 10% off parts and labor, with your comfort and safety as our top priority.