Dependable hydronic heat, sized and installed for your home
From traditional cast-iron to modern condensing boilers, we match equipment to your heating layout. Gas, oil, or electric options available, with a detailed estimate that covers everything before any work begins.
Your estimate covers equipment selection, piping, venting, and removal of the old unit
No two boiler jobs are alike. Your estimate reflects your home's layout, heating needs, and mechanical setup. Pipe retrofitting for older or corroded plumbing, boiler type (standard vs. high-efficiency condensing), fuel selection (gas, oil, or electric), and venting requirements all affect the scope and cost.
Cost depends on your setup. Most boiler installations fall between $10,000 and $25,000, with many projects averaging around $16,000. High-efficiency condensing models cost more upfront but may lower fuel use long-term.
What's included
Equipment selection — standard or condensing, gas / oil / electric
Old boiler removal and disposal
Venting and piping brought to current code
Detailed estimate covering all installation costs
How we do it
Matching the right boiler to your home, then installing it to last
We choose a boiler matched to your heating layout
Boilers are not interchangeable. A cast-iron unit that suits baseboard radiators can underperform with in-floor radiant zones, and a condensing model that lowers fuel costs long-term may need different venting than what it replaces — our specialists assess your distribution setup, zone count, and fuel access before recommending a system, weighing upfront cost against long-term fuel economy honestly.
- Cast-iron vs. condensing: matched to your distribution type and zone count
- Fuel access — gas, oil, or electric — weighed against long-term efficiency
- Equipment from manufacturers proven in Connecticut's cold climate
Every installation is code-compliant and backed for the long term
Boiler work involves hydronic piping, fuel connections, and venting that must meet current safety codes. Our team removes the old unit, upgrades piping as needed, installs matched venting, and fully commissions the system before leaving — boilers last 15 to 30 years when maintained well, and your new unit comes with a manufacturer warranty and optional maintenance plans; financing runs 5 to 15 years since boiler installations do not qualify for Energize CT rebates.
- Old unit removed; piping repurposed or upgraded to code
- Manufacturer warranty included; optional maintenance plans available
- Financing 5–15 years (boiler installs do not qualify for Energize CT rebates)
Reliable heat, professionally installed and backed for the long term
Boiler systems don't qualify for energy rebates, so we don't pretend otherwise. Your detailed estimate outlines every cost up front — typically $10,000 to $25,000 — before any work begins.
We remove and dispose of the old unit, upgrade or repurpose existing piping, and bring venting to current code. Your new system integrates with your baseboards, in-floor heat, or zoned distribution.
Boilers are long-lived equipment. Your new unit comes with a manufacturer warranty, and our optional maintenance plans keep it running efficiently year after year.
We work with brands you trust
As authorized dealers and installers, we carry top-rated HVAC and home comfort equipment from leading manufacturers.
5 steps to a new system you can count on
Every installation follows the same proven process — whatever equipment you're upgrading — from your first call through years of reliable service.
Step 1
In-Home Assessment
We visit your home, inspect the equipment you're replacing, and listen to what you want to change. You get a written, itemized estimate — no cost, no obligation.
- Home walkthrough
- Equipment inspection
- Written estimate
- Your current setup inspectedWe assess the equipment being replaced and how it connects to your home.
- Home measured for proper sizingSquare footage, layout, and insulation all factor into the right capacity.
- Comfort issues documentedTell us what bothers you — cold rooms, noise, running out of hot water — and we plan around it.
- Itemized estimate with equipment, labor, and applicable rebatesYou get a clear cost breakdown before making any decisions.
Step 2
Your Options
Based on the assessment, we present options that fit your home and budget — typically a good, better, and best choice — and explain the trade-offs in plain language.
- Multiple options
- Plain-language trade-offs
- No pressure
- Clear recommendation with pros, cons, and cost breakdownWe explain each option so you can make an informed decision.
- Efficiency ratings explained for each optionWe show what higher efficiency costs up front and saves over time.
- Right-sized to your homeProper sizing prevents short cycling, uneven performance, and wasted energy.
- Your questions answered before you commitTake the time you need — the estimate stands either way.
Step 3
Rebates & Financing
We check every rebate your new equipment qualifies for through Energize CT — heat pumps can earn up to $10,000 — and line up financing so you see the real monthly cost before you decide.
- Rebates identified
- Financing available
- 5-15 year terms
- Energize CT rebate eligibility confirmed for your equipmentWe check the current programs so nothing is left on the table.
- Financing terms from 5 to 15 years availableWe present multiple financing options to fit your budget.
- Complete cost plan with rebate offsets where applicableYour quote shows the full picture including all available savings.
- Monthly payment options calculatedWe break down what your monthly cost will be under each financing plan.
Step 4
Installation Day
Our licensed technicians remove the old equipment and install your new system to manufacturer specifications and local code. Most installations are finished in a single day.
- Licensed technicians
- Code-compliant
- Clean job site
- Old equipment removed and disposed of properlyWe handle all removal and disposal of your old system.
- New system installed to manufacturer specsEvery connection and component meets manufacturer requirements.
- Connections updated as neededElectrical, piping, venting, or ductwork adjusted to fit the new system.
- System tested and verified before we leaveWe run the full system and confirm proper operation before signing off.
Step 5
Walkthrough & Warranty
Before we go, we walk you through your new system — controls, settings, and what to expect. Then we register your manufacturer warranty and set up optional maintenance plans.
- Hands-on walkthrough
- Warranty registered
- Maintenance plans
- You see the system run and learn the controlsSettings, filters, and what normal operation looks like — you'll know how everything works.
- Manufacturer warranty registered and activatedWe handle all warranty paperwork so you are covered from day one.
- Follow-up checks scheduled as neededWe schedule return visits to verify everything is running properly.
- Optional maintenance plans for long-term performanceRegular tune-ups keep your system efficient and extend its lifespan.
Trusted by Connecticut families for heating installations
Heat pump rebates can cover most of the cost
Federal tax credits and Energize CT rebates make heat pump installation significantly more affordable. Replacing electric baseboard or resistance heat? Your heat pump may qualify for an enhanced Energize CT rebate of $1,500 per ton (up to $10,000) — we confirm eligibility and handle the paperwork.
Energize CT heat pump rebates
Up to $10,000 eligible
As an Energize CT Authorized Contractor, HCP helps you access programs funded by a charge on customer energy bills. Your home energy audit copay is just $40.
- Up to $10,000 for qualifying heat pump installation
- Up to $900 for heat pump water heater
- Rebates based on system size and efficiency rating
Financing for heat pump projects
Low-rate financing
Multiple financing options help you start your heat pump project now without the full upfront cost.
- Smart-E Loan low fixed rates for energy improvements
- On-bill financing pay through your monthly utility bill
Average heating replacement costs
Most boiler installations range from $10,000 to $25,000, with many homes averaging around $16,000. Heat-pump alternatives qualify for rebates of up to $10,000.
Boiler installation
Total costDistributes heat through radiators or in-floor systems. Sized to your home’s layout and piping.
Ductless heat pump
Total costHeats and cools without ductwork. Zoned control for individual rooms.
Forced-air heat pump
Total costUses existing ductwork. Heats and cools your whole home with one system.
Heating services
Whether you need installation, repair, or a full replacement, we handle every heating system.
Heating Installation
New furnace, boiler, or heat pump — installed with rebate support
Heating Replacement
Upgrade an aging system to modern efficiency
Heating Repair
Fast diagnosis and honest repair recommendations
Heating Maintenance
Bi-annual tune-ups to extend system life
System Comparison
Side-by-side comparison of heating options
Heating Rebates
Energize CT rebates up to $10,000 for heat pumps
Water Heaters
Heat pump water heaters and high-efficiency tank replacements.
Air Sealing
Seal gaps and cracks that let conditioned air escape and outdoor air in.
Still have questions?
Call us at (203) 450-3000 or request a free estimate.
Ready to replace your boiler?
Get a free estimate covering equipment selection, piping, venting, and removal of the old unit. Licensed CT contractor.