Room-by-room comfort from a single outdoor unit
Heat and cool every room with one ductless mini-split system, no ductwork required. We size the system to your home, run clean lines, test every zone, and file the Energize CT paperwork for you. Most projects fall between $8,000 and $35,000 before rebates, with up to $10,000 in Energize CT incentives.
Your estimate covers the full scope of a ductless installation
One system, flexible zones. Whether you are upgrading a room that is always too hot or too cold, or replacing an older central system, we design a setup that fits your layout, comfort goals, and budget. A single outdoor unit can serve multiple indoor heads, giving every room its own temperature control.
Cost depends on your home. Most projects fall between $8,000 and $35,000 before rebates, with a typical mid-range project around $17,500. System size, number of zones, line routing, and any electrical work all affect the total. Financing starts as low as about $45/month, and rebates can bring the net cost well below the sticker price.
What you'll walk away with
Custom estimate sized to your home
Equipment selection from major brands
Rebate paperwork handled for you
System tested before we leave
How we install it
Sized to your home, installed to run quiet for years
We match the system to your rooms, not a rule of thumb
Right-sizing delivers the rated efficiency you are paying for. We assess each space and size the number of indoor heads and the outdoor unit to your layout and comfort goals — a single outdoor unit can serve several indoor heads, and because each head is controlled independently, every room gets the temperature it actually needs rather than one setting for the whole house.
- Each space assessed individually before any equipment is selected
- One outdoor unit can serve multiple independently controlled indoor heads
- Right-sizing prevents short-cycling and "never quite keeps up" problems
Clean line runs, secured units, every zone tested before we leave
No surprises on the electrical side. Our licensed technicians conceal refrigerant and drain lines wherever the home allows; ductless systems need a dedicated 240V circuit, so we confirm your electrical capacity up front and fold any needed work into the quote. Before we leave, we test every zone and walk the finished job with you.
- Refrigerant and drain lines concealed wherever the home allows
- 240V electrical capacity confirmed and included in the quote up front
- Every zone tested and walked through with you before the crew departs
Efficient heating and cooling, installed and supported
We file the Energize CT paperwork so you receive every dollar you qualify for, with incentives up to $10,000 depending on household income and system type.
Our licensed technicians run clean, efficient refrigerant and drain lines and test airflow in every zone before we leave.
Up to 10 years of manufacturer warranty plus optional maintenance plans keep your system running smoothly long after install day.
5 steps to a new system you can count on
Every installation follows the same proven process — whatever equipment you're upgrading — from your first call through years of reliable service.
Step 1
In-Home Assessment
We visit your home, inspect the equipment you're replacing, and listen to what you want to change. You get a written, itemized estimate — no cost, no obligation.
- Home walkthrough
- Equipment inspection
- Written estimate
- Your current setup inspectedWe assess the equipment being replaced and how it connects to your home.
- Home measured for proper sizingSquare footage, layout, and insulation all factor into the right capacity.
- Comfort issues documentedTell us what bothers you — cold rooms, noise, running out of hot water — and we plan around it.
- Itemized estimate with equipment, labor, and applicable rebatesYou get a clear cost breakdown before making any decisions.
Step 2
Your Options
Based on the assessment, we present options that fit your home and budget — typically a good, better, and best choice — and explain the trade-offs in plain language.
- Multiple options
- Plain-language trade-offs
- No pressure
- Clear recommendation with pros, cons, and cost breakdownWe explain each option so you can make an informed decision.
- Efficiency ratings explained for each optionWe show what higher efficiency costs up front and saves over time.
- Right-sized to your homeProper sizing prevents short cycling, uneven performance, and wasted energy.
- Your questions answered before you commitTake the time you need — the estimate stands either way.
Step 3
Rebates & Financing
We check every rebate your new equipment qualifies for through Energize CT — heat pumps can earn up to $10,000 — and line up financing so you see the real monthly cost before you decide.
- Rebates identified
- Financing available
- 5-15 year terms
- Energize CT rebate eligibility confirmed for your equipmentWe check the current programs so nothing is left on the table.
- Financing terms from 5 to 15 years availableWe present multiple financing options to fit your budget.
- Complete cost plan with rebate offsets where applicableYour quote shows the full picture including all available savings.
- Monthly payment options calculatedWe break down what your monthly cost will be under each financing plan.
Step 4
Installation Day
Our licensed technicians remove the old equipment and install your new system to manufacturer specifications and local code. Most installations are finished in a single day.
- Licensed technicians
- Code-compliant
- Clean job site
- Old equipment removed and disposed of properlyWe handle all removal and disposal of your old system.
- New system installed to manufacturer specsEvery connection and component meets manufacturer requirements.
- Connections updated as neededElectrical, piping, venting, or ductwork adjusted to fit the new system.
- System tested and verified before we leaveWe run the full system and confirm proper operation before signing off.
Step 5
Walkthrough & Warranty
Before we go, we walk you through your new system — controls, settings, and what to expect. Then we register your manufacturer warranty and set up optional maintenance plans.
- Hands-on walkthrough
- Warranty registered
- Maintenance plans
- You see the system run and learn the controlsSettings, filters, and what normal operation looks like — you'll know how everything works.
- Manufacturer warranty registered and activatedWe handle all warranty paperwork so you are covered from day one.
- Follow-up checks scheduled as neededWe schedule return visits to verify everything is running properly.
- Optional maintenance plans for long-term performanceRegular tune-ups keep your system efficient and extend its lifespan.
We work with brands you trust
As authorized dealers and installers, we carry top-rated HVAC and home comfort equipment from leading manufacturers.
Average costs before rebates
Prices vary by home size, existing infrastructure, and system configuration. All ranges reflect Connecticut market data.
Ductless heat pump
Total costHeats and cools without ductwork. Zoned control for individual rooms.
Forced-air heat pump
Total costUses existing ductwork. Heats and cools your whole home with one system.
Natural gas furnace
Total costReliable forced-air heating where natural gas is available.
Boiler
Total costDistributes heat through radiators or in-floor systems.
Oil-to-gas conversion
Total costSwitch from oil to natural gas for lower fuel costs and cleaner operation.
Oil-to-heat pump conversion
Total costReplace oil with an electric heat pump. Heats and cools with one system.
Gas water heater
Total costStandard or tankless gas water heaters. Reliable hot water where gas service is available.
Heat pump water heater
Total cost3x more efficient than conventional tanks. Federal tax credit eligible (30% up to $2,000).
Heat pump rebates can cover most of the cost
Federal tax credits and Energize CT rebates make heat pump installation significantly more affordable. Replacing electric baseboard or resistance heat? Your heat pump may qualify for an enhanced Energize CT rebate of $1,500 per ton (up to $10,000) — we confirm eligibility and handle the paperwork.
Energize CT heat pump rebates
Up to $10,000 eligibleAs an Energize CT Authorized Contractor, HCP helps you access programs funded by a charge on customer energy bills. Your home energy audit copay is just $40.
- Up to $10,000 for qualifying heat pump installation
- Up to $900 for heat pump water heater
- Rebates based on system size and efficiency rating
Financing for heat pump projects
Low-rate financing
Multiple financing options help you start your heat pump project now without the full upfront cost.
- Smart-E Loan low fixed rates for energy improvements
- On-bill financing pay through your monthly utility bill
Your neighbors already made the switch
Heating services
Whether you need installation, repair, or a full replacement, we handle every heating system.
Heating Installation
New furnace, boiler, or heat pump — installed with rebate support
Heating Replacement
Upgrade an aging system to modern efficiency
Heating Repair
Fast diagnosis and honest repair recommendations
Heating Maintenance
Bi-annual tune-ups to extend system life
System Comparison
Side-by-side comparison of heating options
Heating Rebates
Energize CT rebates up to $10,000 for heat pumps
Water Heaters
Heat pump water heaters and high-efficiency tank replacements.
Air Sealing
Seal gaps and cracks that let conditioned air escape and outdoor air in.
Still have questions?
Call us at (203) 450-3000 or request a free estimate.
Ready to see what a ductless system would cost?
Free estimate. No pressure. Licensed CT contractor (HIC #0644515).